Full Graphics 12864 Smart Controller Display
Full graphics smart controller with 128 x 64 display.
Out of stock
The Full Graphic Smart Controller contains a SD-Card reader, a rotary encoder and a 128 x 64 dot matrix LCD display.
This display board is intended to provide an easy and simple solution to interact with a 3D printer. Given that many of the 3D printer’s mainboards are based on the RAMPS design this display board is supported by many other mainboards.
When using a RAMPS board the Full Graphic Smart Controller is simple to connect using the “smart adapter” which connects directly to an Arduino Mega 2560. Many other mainboards such as SKR 1.3 have a direct interface for this display.
1x 12864 LCD controller(SD Card not included)
1x Smart Adaptor
2x 30cm Cable
|Dimensions||14 × 13 × 5 cm|